Extron electronics TLP 710MV Bedienungsanleitung PDF herunterladen

Product Category

IMPORTANT:

Refer to www.extron.com for

the complete TLP 710 Series

user guide before connecting

the product to the power source.

TLP 710MV and TLP 710TV • Setup Guide

Overview

The Extron TLP 710MV (wall-mounted) and TLP 710TV (desk-mounted) TouchLink

™

Panels provide simple and versatile

conﬁguration and control for a range of IP Link

control systems. Graphic and text objects are displayed on the screen.

These objects have system control functions associated with them, and the touch overlay allows you to activate or regulate

those functions.

These touchpanels communicate through an Ethernet connection to a conﬁgurable IP Link control processor. Video and

audio input is provided by a twisted pair cable connected to an Extron MTP transmitter.

NOTE: The network output must be connected to a network switch, hub, or router that is connected to an Ethernet

LAN or the Internet. An Extron IP Link controller must also be connected to the same network. Suggested

models include IPL T S series (for example, IPL T S4), IPL 250, IPL T CR48, IPL T SFI244, or IPCP 505.

Extron strongly recommends that power is provided by a Power over Ethernet (PoE) power supply.

This guide provides basic instructions for experienced installers to mount and perform initial conﬁguration on the

TLP 710 series of touchpanels. Full instructions and reference material can be found in the TLP 710MV and TLP 710TV User

Guide, which is available on the Extron website (www.extron.com).

Front Panel Features

Extron TLP 710TV

Extron

Extron TLP 710MV

Motion Sensor — when no motion has been detected for a user-deﬁned period of time, the unit goes into sleep

mode. When motion is detected by the sensor, the screen display is restored and active.

Microphone — is located below the LCD screen.

Speaker — one, placed under the screen, on the left side of the panel, provides audible feedback for the user.

Programmable LEDs — one on each top corner can be programmed to provide system feedback. They light red or

green and can blink or light steadily.

LCD screen — has a 800x480 resolution with a touch overlay. Extron software is used to design and conﬁgure a graphic

user interface to display buttons, text, or icons, which have user-deﬁned functions associated with them.

Connection status LED — is unlit during normal operation. The LED blinks red if the connection to the IP Link

controller is lost.

Light Sensor — (can be seen only from above the unit) monitors ambient light level and adjusts screen brightness.

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Product Category

1Product CategoryIMPORTANT:Refer to www.extron.com forthe complete TLP 710 Seriesuser guide before connectingthe product to the power source.TLP 710MV

Seite 2 - Extron TLP 710MV

2TLP 710MV and TLP 710TV • Setup Guide (Continued)Use the Extron removal tool to separate the front bezel from the TLP 710MV. Insert the tool into on

Seite 3 - Mounting Options

3Product CategoryInitial CongurationBefore use, conﬁgure the touchpanel, using the on-screen menus.1. Press the Menu button once. (See “Menu button

Seite 4 - Reset Modes

468-2028-50 Rev. A09 11Extron USA - WestHeadquarters+800.633.9876Inside USA/Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+800.633.98

Weitere Dokumente für Nein Extron electronics TLP 710MV

Um das Dokument anzuzeigen Extron electronics TLP 710MV Betriebsanweisung

Extron electronics TLP 710MV Betriebsanweisung (49 Seiten)

Extron electronics TLP 710MV Betriebsanweisung (50 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Extron electronics TLP 710MV Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Extron electronics TLP 710MV herunter. TLP 710MV and TLP 710TV Setup Guide Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Nein Extron electronics TLP 710MV

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Extron electronics TLP 710MV