Extron-electronics DVI DA Plus Series User Guide Bedienungsanleitung

68-1536-01 Rev. E12 10DVI DA Plus SeriesUser GuideDVI & HDMI®DVI Distribution Amplifiers

Rear Panel FeaturesThe rear panels for the DVI DA4 Plus (top panel), the DVI DA6 Plus (middle panel), and DVI DA8 Plus (bottom panel) are shown below.

CAUTION: These products are intended to be supplied by a Listed Power Unit marked “Class 2” or “LPS”, rated 12 VDC, maximum 1.0 A (DVI DA4 Plus) or m

DVI Connector Pin AssignmentsThe illustration below shows the pin assignments for the DVI-I connectors. See the note under input connectors for inform

OperationThis section of the guide provides information on:• Front Panel Features• Operation• EDID Minder• Disabling the EDID Minder• TroubleshootingF

EDID MinderWhen a DVI video source boots up, it normally communicates with the output device using the bidirectional Extended Display Identification Da

3. Locate the DIP switches. There is a single bank of four switches for the DVI DA4 Plus (outlined in red in figure 5). Each switch regulates the corr

EDID LockSome applications require the distribution amplifier to maintain specific EDID information. This information could be lost after power is cycle

4. By default, the EDID Mode DIP switch is in the down (disabled) position, allowing for normal operation. To enable the EDID Lock feature, toggle th

TroubleshootingNo output signal — Check that the front panel LED is lit (amber shows that the unit is receiving power, green shows that it is also rec

SpecicationsVideoMaximum data rate ... 4.95 Gbps (1.65 Gbps per color)Maximum pixel clock ... 165 MHzReso

This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipmen

Reference InformationIncluded PartsDescription Part NumberDVI DA4 Plus 60-931-21or DVI DA6 Plus 60-932-21or DVI DA8 Plus 60-933-2112 VDC, 1 A desktop

MountingThis section outlines the various mounting options available for the DVI DA Plus series of distribution amplifiers:• Tabletop Placement• Rack M

Rack Mounting the DVI DA4 PlusThe DVI DA4 Plus can be mounted a range of (optional) rack shelves (see Optional Parts on page 14). To mount the units,

Extron® WarrantyExtron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of pur

Extron USA - WestHeadquarters+800.633.9876Inside USA/Canada Only+1.714.491.1500+1.714.491.1517 FAXExtron USA - East+800.633.9876Inside USA/Canada Only

FCC Class A NoticeThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rule

ContentsIntroduction ... 1About this Guide ... 1About the DVI DA Plus

DVI DA Plus Series • Contents vi

IntroductionAbout this GuideThis user guide describes the installation, operation, and specifications of the Extron® DVI DA4 Plus, DVI DA6 Plus, and DV

FeaturesEDID Minder — The EDID Minder maintains continuous EDID (Extended Display Identification Data) communication with the attached source to ensure

InstallationThis section describes:• Installation Overview• Rear Panel Features Installation OverviewAll three distribution amplifiers can be mounted o