Extron-electronics SW DVI Plus Series User Guide Bedienungsanleitung PDF herunterladen (Seite 23)

SW DVI Plus Series • Operation 17

Resetting

To reset the switcher to its factory default settings:

1. Press and hold the Input 1 button while power is being applied to the unit.

2. Continue holding the Input 1 button until the power-up sequence completes.

NOTE: Resetting restores the EDID mode to automatic, with a resolution of

1024x768 @ 60 Hz. If a display is connected at the time of the reset, its EDID

information is detected and stored at the inputs.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 44 45

Keine Kommentare

Extron-electronics SW DVI Plus Series User Guide Bedienungsanleitung Seite 23