Extron-electronics PMK 350 Bedienungsanleitung PDF herunterladen (Seite 1)

PMK 350 Projector Mounting Kit • Installation Guide

PRELIMINARY

Extron PMK 350 Installation Guide

The PMK 350 Low Proﬁle Multi-product Projector Mounting Kit is an above-

projector mounting kit that can hold multiple products of 1/8, 1/4, and 1/2 rack

sizes, and their power supplies. Each kit consists of a steel mounting tray that

is available in black (part #70-563-02) or white (part #70-563-03); a U-bolt with a

contoured brace bracket and an L bracket to secure the PMK to the projector pole;

and a plastic, adhesive-backed overlay sheet (either black or white), containing four

sizes of covers that can be torn out from the perforated sheet and applied over the

opening on the bottom of the mounting tray.

The PMK 350 attaches to a 1.5" to 2" diameter projector mounting pole. Its low 2"

height allows it to be mounted in tight spaces between the projector and the ceiling,

while its width of 13.6" and depth of 11.5" enable it to accommodate a variety of

device sizes.

Extron

PMK 350

Multi-product Projector

Mounting Kit

Cover Sheet

Front Plate

Rear Plate

U-bolt

L-shaped

Bracket

Contoured

Base

Extron

Power Supply

Extron

Quarter-rack

Sized Product

Mounting a quarter-rack sized product and its power supply

Mounting the PMK 350 to the Projector Pole

Mount products on the PMK 350 as follows:

1. Remove the front and back panels from the PMK 350, using a #2 Philips

screwdriver. Retain the four screws to reattach the plates when you are

ﬁnished.

2. Remove any rubber feet from the bottom of the device(s) to be mounted.

3. Secure a device to one side of the mounting tray, using two of the supplied

4-40 x 3/16" screws in opposite (diagonal) corners. Use an Extron Tweeker

(provided) or a Philips #1 screwdriver to tighten the screws.

4. If a power supply is connected to the device, use the two included cable tie

wraps to strap the power supply to the bracket; or attach additional device(s),

as described in step 3.

5. Place the PMK 350 around the projector ceiling mounting pole. (See the

illustration, above.)

68-1242-01, Rev A

07 06

1 2 3 4

PRELIMINARY 1
4

Inhaltsverzeichnis

Seite 1 - PRELIMINARY

1PMK 350 Projector Mounting Kit • Installation Guide PRELIMINARYExtron PMK 350 Installation GuideThe PMK 350 Low Proﬁle Multi-product Projector Mounti

Seite 2

PMK 350 Installation Guide, cont’dPMK 350 Projector Mounting Kit • Installation Guide2PRELIMINARY6. Pass the two legs of the U-bolt through the follo

Seite 3

3PMK 350 Projector Mounting Kit • SIS Programming and ControlPRELIMINARYApplication DiagramsThe following four diagrams show Extron products in a var

Seite 4 -

PMK 350 Installation Guide, cont’dPMK 350 Projector Mounting Kit • Installation Guide4PRELIMINARY SYNC CONVERTER/STABILIZER WITH ADSPSCS 300H-SHIFT

Kommentare zu diesen Handbüchern

Keine Kommentare

Extron-electronics PMK 350 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Extron-electronics PMK 350 herunter. Extron Electronics PMK 350 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Extron-electronics PMK 350 Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Extron-electronics PMK 350 herunter. Extron Electronics PMK 350 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Extron-electronics PMK 350