Extron-electronics Fiber Optic Test Set Setup Guide Bedienungsanleitung PDF herunterladen

FPM 101 Function Buttons

Power

This button provides two functions:

z Press and hold to turn the power meter on. The meter turns off after ﬁve

minutes of inactivity.

z With the power meter on, press and hold to disable or enable the auto off

feature.

Wavelength/Backlight

This button provides two functions:

z Press and release to manually cycle through the calibrated wavelengths in the

following order:

850 nm > 1300 nm > 1310 nm > 1490 nm > 1550 nm > 850 nm ...

NOTE: When the power meter is receiving a wavelength ID indication

(WAVE ID) from the FLS 101 light source, it automatically switches to

the WAVE ID wavelength.

z With the power meter on, press and hold to toggle the backlight on or off.

dB/dBm/µW

This button provides two functions:

z Press and release to toggle display readings between insertion loss (dB) and

power (dBm).

z Press and hold to view power in microwatts (µW).

Ref/Set

This button provides two functions:

z Press and release to display the stored reference level for the currently

selected wavelength or the stored reference levels for multiple wavelengths.

z Press and hold until HELD SET is displayed to store the currently measured

level, or multiple levels, as the new reference.

This guide provides instructions for an experienced

technician to begin using the Extron Fiber Optic Power

Meter (FPM 101) and Light Source (FLS 101).

The Extron Fiber Optic Test Set includes all the tools needed to measure optical

power and cable loss in multimode (MM) and singlemode (SM) fiber optic AV

equipment and fiber optic cabling. The light source includes both a multimode LED

output that operates at 850 nanometers (nm) and 1300 nm, and a singlemode laser

output that operates at 1310 nm and 1550 nm. The power meter is compatible

with both multimode and singlemode fiber and measures optical power in dBm or

microwatts (µW) and insertion loss in dB.

µW

POWER

Fiber Optic Test Set • Setup Guide

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - FPM 101 Function Buttons

1FPM 101 Function ButtonsPower This button provides two functions: z Press and hold to turn the power meter on. The meter turns off after ﬁve minutes

Seite 2 - FPM 101 Display Readings

FPM/FLS 101 • Quick Start Guide (Continued)2FPM 101 Display ReadingsThe following table lists the display readings for the FPM 101 power meter. WAVE

Seite 3 - Power Button

3FLS 101 Function ButtonsPower Button Press and hold to toggle the FLS 101 On or Off.POWERMultimode (MM) WAVE ID / CW SelectThis button provides two f

Seite 4 - Low Battery Indicator

FPM/FLS 101 • Quick Start Guide (Continued)4MM active output port indicators — Light to indicate the wavelength of the MM output port. z ON (continuo

Seite 5 - FLS 101 FPM 101

5Testing Multimode or Singlemode Links Verify the Transmit Reference Cable1. Turn on the power meter and light source. Allow the light source to stab

Seite 6

FPM/FLS 101 • Quick Start Guide (Continued)6FPM 1010.4 dBNMCouplerorBulkheadReceive ReferenceCableTransmit ReferenceCableNAdapter CapMM: Mandrel Wrap

Seite 7 - FIBER OPTIC LIGHT SOURCE

7Insert the Link14. Once the loss value is acceptable (< 0.75 dB) disconnect both the transmit and receive reference cables from the coupler or bul

Seite 8 - Included Accessories

FPM/FLS 101 • Quick Start Guide (Continued)Extron USA - West Headquarters+800.633.9876Inside USA and Canada Only+1.714.491.1500+1.714.491.1517 FAXExt

Kommentare zu diesen Handbüchern

Keine Kommentare

Extron-electronics Fiber Optic Test Set Setup Guide Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Werkzeug Extron-electronics Fiber Optic Test Set Setup Guide herunter. Extron Electronics Fiber Optic Test Set Setup Guide User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Extron-electronics Fiber Optic Test Set Setup Guide