Extron-electronics FOX DA8 Plus User Guide Bedienungsanleitung PDF herunterladen (Seite 23)

5. Click Next. The program extracts the firmware files and places them in a folder

identified in the InstallShield Wizard window.

NOTE: Note the folder to which the firmware file is saved.

6. Click Finish to exit the program.

7. Connect a computer that runs the Windows operating system to either the RS-232 port

or the Configuration port of the DA (see “Installation and Operation,” starting on

page 4, for more details).

8. Start the FOX Extenders Program and connect to the front panel Configuration (USB)

port on the DA (see “Starting the program,” on page 14).

9. Click Tools > Update firmware or the Update Firmware button ( ). The Extron

Firmware Loader appears (see figure 13, below).

Figure 13. Extron Firmware Loader Window and File Menu

10. Select the FOX DA8 Plus and click File > Open. The Choose Firmware File screen

appears (see figure 14, below).

Figure 14. Choose Firmware File Window

11. Navigate to and select the new firmware file. Click Open. The Choose Firmware File

window closes.

ATTENTION: The ﬁrmware ﬁle must have an .s19 extension. Other ﬁle types can

cause the DA to stop functioning.

NOTES: • When downloaded from the Extron website, the firmware is placed in a

subfolder of C:\Program Files\Extron\Firmware.

• Valid firmware files must have the file extension .S19. A file with any

other extension is not a firmware upgrade.

• The original factory-installed firmware is permanently available on the

DA. If the attempted firmware upload fails for any reason, the DA reverts

to the factory-installed firmware.

FOX DA8 Plus • Remote Control 17

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29

Keine Kommentare

Extron-electronics FOX DA8 Plus User Guide Bedienungsanleitung Seite 23