Extron electronics CS 120P Betriebsanweisung PDF herunterladen (Seite 19)

18. Attach the speaker wire to the strain relief tie down point using the provided zip

tie.

Zip Tie

Strain Relief

Tab

Figure 20. Attaching the Speaker Wire to the Strain Relief Point

NOTE: Skip step 19 if installing the CS 3T in an open back conﬁguration.

19. Attach the secondary support line (when mounting with the CS 120P

configuration) — Attach the support line as shown below.

a. Insert the free end of the zip tie, located inside of the CS 120P (see Fig. A below),

through the secondary attachment point of the speaker (see Fig. B below).

b. Insert the free end of the zip tie into the locking connector on the opposite end of

the zip tie (see Fig. C below).

c. Tighten the zip tie.

NOTE: Leave enough slack in the zip tie so that the speaker can be securely

installed in the enclosure.

Fig. A

Fig. B

Fig. C

Secondary

Tie off Point

Zip Tie

CS 3T and CS 120P User Guide • Installation 14

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 36 37

Keine Kommentare

Extron electronics CS 120P Betriebsanweisung Seite 19