Extron electronics CS 120P Betriebsanweisung PDF herunterladen (Seite 27)

11. Place the CS 120P into the ceiling grid — Place the CS 120P over the tile

grid so that the CS 120P is safely supported on the two short edges. If the ceiling

tile was installed, ensure that the hole in the tile is aligned with the hole in the

CS 120P (see figure 32).

NOTE: 2 feet x 2 feet (600 mm x 600 mm) grid mounting is the same as 2 feet x

4 feet (600 mm x 1200 mm) grid mounting.

Fig: Mounting the P

Figure 32. Mounting the CS 120P in a 2 feet x 2 feet (600 mm x 600 mm)

Ceiling Grid

12. Attach secondary support lines — Attach all secondary support lines as shown in

figure 33.

ATTENTION:

• Do not allow any slack in the support cables.

• Ne laissez aucun jeu entre les câbles de support.

NOTE:

• Observe all applicable building codes and local ordinances when installing the

speaker.

• When placing the CS 120P in a micro tile grid without tiles, use the secondary

attachment points as hanger suspension points.

Secondary Support

Cables (3)

Attach cables here

and secure.

Anchor ends to suitable

solid secure points within the

permanent building structure.

SC 26T with PRE 120

Figure 33. Attaching Secondary Support Lines

CS 3T and CS 120P User Guide • Installation 22

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 36 37

Keine Kommentare

Extron electronics CS 120P Betriebsanweisung Seite 27