Extron-electronics Cable Retraction System User Guide Bedienungsanleitung PDF herunterladen (Seite 28)

Cable Retraction System • Operation 22

Retract a Cable

1. Disconnect the cable from the device and with one hand hold it firmly by the connector

to keep the cable taught.

2. With your other hand, press and hold the cable release button.

CAUTION: Use one hand to control the cable as it retracts. A cable allowed to

retract too quickly and without control can cause possible injury to the user or

damage the furniture surface, Cable Cubby, and nearby items.

3. With one hand pressing the release button, continue to hold the cable with the other

hand and allow it to slowly be pulled back into the retractor.

4. When the stop collar (or connector if the cable does not have a stop collar) is seated

against the cable release assembly, release the cable and button.

Hold the cable taught

by the connector.

Press and hold the

cable release button.

Slowly allow the cable

to be pulled until the

stop collar (or connector)

seats against the cable

release assembly.

Release the cable

and button.

Figure 21. Cable Retraction

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Extron-electronics Cable Retraction System User Guide Bedienungsanleitung Seite 28