Extron-electronics FPC 5500 Bedienungsanleitung PDF herunterladen (Seite 21)

Extron FPC 5500 • Matrix System Operation 15

Starting Up the Controller and Logging In and Out

Use the FPC to control the matrix as follows:

1. For a Matrix 12800 system, ensure that all BMEs that are part of the system have been

connected to each other and their BME numbers have been set correctly (see the

Matrix 12800 user guide for this procedure). For FOX Matrix 14400 and 320x systems,

ignore this step.

2. Power on the FPC. After the computer boots up, the LCD touch panel displays the FPC

startup screen (see figure 15). Observe the message **NOT Logged ON** in the

upper right corner of the blue ﬁeld.

Figure 15. Startup Screen

NOTE: The FPC 5500 LCD has an optional screen saver function that blanks the

screen after 5 minutes. Touch on the screen to wake up the controller (see

”Miscellaneous Screen” on page 41 for how to disable the screen saver).

3. Touch the Log On button. The IP connection screen appears (see figure 16).

Figure 16. Address and Password Entry

4. Decide whether you need to edit the FPC 5500 IP Address and Subnet Mask ﬁelds

(see the guidelines below). If you need to edit the ﬁelds, proceed to step 5. If you do not

need to edit the ﬁelds, proceed to step 6.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 58 59

Keine Kommentare

Extron-electronics FPC 5500 Bedienungsanleitung Seite 21