Extron-electronics MLC 206 AAP EC User Guide Bedienungsanleitung PDF herunterladen (Seite 13)

2-5MediaLink Controllers • Installation

5. Detach one of the preprinted labels or one of the blank labels from the sheet of

labels that is included with the MLC 206. Remove the protective film from the

front of the label. To create customized labels, use a label maker, such as a

Brother

P-touch

, and clear label material to print text to place on the blank

labels.

6. Insert the new label into the opening from which the other label was removed.

7. Repeat steps four through six for each label you wish to replace.

8. Place the plastic window back onto the MLC to cover the labels.

9. Align the openings in the faceplate with the buttons, knobs, and LEDs of the

MLC, and place the faceplate on the MLC.

10. Replace the four screws removed in step 1, and hand tighten them.

VCR

DVD

Extron

MediaLin

k Controlle

MLC 206

DISPLAY

POWER

VOLUME

MAX/

MIN

Window Labels

Remove four screws.

Plastic Window

Faceplate

Replacing labels

The backlit input selection labels are inaccessible once the MLC is installed into a

wall or furniture. The faceplate must be removed to gain access to the labels.

1. Use a small Philips screwdriver to remove the four faceplate attachment

screws, and keep them for later use.

2. Lift the faceplate off the MLC.

3. Lift off the transparent, protective, plastic window that covers the labels.

4. Lift off the transparent, rectangular label you want to replace, being careful

not to damage the circuits beneath it. You may need to use a small, flat

bladed screwdriver to gently pry the label out.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Keine Kommentare

Extron-electronics MLC 206 AAP EC User Guide Bedienungsanleitung Seite 13