Extron-electronics P-2 DA12 Series Setup Guide Bedienungsanleitung PDF herunterladen

Setup Guide — P/2 DA8 and DA12 Series

(Continued on reverse side)

Installation

Step 1

Turn all the equipment off and disconnect all cables.

Step 2

Place the unit on a convenient table top or mount it in a rack, under a desk, or on a projector

mounting system. Follow the instructions included with the appropriate mounting kit.

Step 3

Use the provided IEC connector to connect the unit to a convenient power socket. The internal

power supply supports 100-240 VAC, 50-60 Hz.

Always use a power supply speciﬁed by Extron for this unit. Use of an unauthorized

power supply voids all regulatory compliance certiﬁcation and may cause damage to the

supply and the distribution ampliﬁer.

Step 4

Connect a video source to the video input, using a female DB-15 connector. Acceptable input

formats include: RGBHV, RGBS, RGsB, RsGsBs, YUV (tri-level and bi-level sync), S-video, and

composite video.

Step 5 (P/2 DA8 A and P/2 DA12 A models only)

Connect an unbalance audio source to the female 3.5 mm TRS connector.

Step 6

Connect up to eight (P/2 DA8 series) or twelve (P/2 DA12 series) display devices using female

DB-15 connectors. The output signal format follows that of the input.

Output 1 is used for DDC reference.

The Extron

P/2 DA8 and P/2 DA12 series of distribution

ampliﬁers distribute video (all models) and stereo audio

(P/2 DA8 A and P/2 DA12 A models only). Unless

otherwise stated, these instructions apply to all four

models.

These instructions provide a quick setup

guide for experienced installers. Installation

and service must be performed by authorized

personnel only.

100-240V

0.6

50-60Hz

INPUTS

VIDEO OU

TPUTS

P/2 D

A8 A

2 4

6 8

1 3 5

AUDIO OUTPUT

MUTE

1 3 5 7

2 4 6 8

Local Monitor

Audio In

Video In

Projector

Plasma

Display

Sound

System

1 2

Installation 1
Conﬁguration 2

Inhaltsverzeichnis

Seite 1 - Installation

Setup Guide — P/2 DA8 and DA12 Series(Continued on reverse side)InstallationStep 1Turn all the equipment off and disconnect all cables.Step 2Place th

Seite 2 - Conﬁguration

Setup Guide — P/2 DA8 and P/2 DA12 Series (cont’d)Extron USA - West Headquarters+800.63 3.9876Inside USA / Canada Only+1.714.491.1500+1.714.491.1517

Kommentare zu diesen Handbüchern

Keine Kommentare

Extron-electronics P-2 DA12 Series Setup Guide Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Extron-electronics P-2 DA12 Series Setup Guide herunter. Extron Electronics P-2 DA12 Series Setup Guide User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Extron-electronics P-2 DA12 Series Setup Guide